Hi Alexander, Did you get this issue resolved? It sounds to me like the node doesn't have the local disk listed as a backup boot option if network boot fails.
Scott On Fri, Aug 19, 2016, 3:29 AM Alexander Cogneau <[email protected]> wrote: > Hi Scott, > > When I just remove the sanboot command I get this output: > > forcing local booting with sanboot 0x80 > > exiting iPXE and continuing to next firmware boot device >> successfully completed the chain-loaded script; booting locally with >> 'exit' >> No more network devices > > > Kind regards, > Alexander > > Op vrijdag 19 augustus 2016 09:48:16 UTC+2 schreef Alexander Cogneau: > >> Hi Scott, >> >> Thank you for your response, I'll look into the thread. >> >> I am using a Cisco UCS C220 M4 Rack Server: >> >> http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-c220-m4-rack-server/index.html >> >> Kind regards, >> Alexander >> >> >> Op donderdag 18 augustus 2016 18:40:18 UTC+2 schreef Scott McClellan: >>> >>> Hi Alexander, >>> >>> It looks like this might be a problem with sanboot. This thread may be >>> of interest to you: >>> https://groups.google.com/forum/#!topic/puppet-razor/QtHA7Kfa-II — The >>> solution provided there is around overriding the boot_local.erb file to get >>> around (essentially remove) the sanboot ipxe command. >>> >>> Can you tell me a bit about the hardware you are using, to see if you >>> have hardware similar to the thread above? >>> >>> Hope that helps! >>> >>> Scott >>> >>> On Fri, Aug 12, 2016 at 11:31 AM Alexander Cogneau < >>> [email protected]> wrote: >>> >>>> Hi all, >>>> >>>> I've succesfully installed and configured razor-server (at least I hope >>>> so) and I'm trying to let them boot CentOS 7. I created the policy, tags, >>>> repo ... and when it boots the first time CentOS is installed (with the >>>> default Centos/7.task). But then it goes wrong. I know that CentOS is >>>> installed succesfully because when I put the HDD on top in the boot order, >>>> the CentOS installation boots without doing DHCP and PXE. >>>> >>>> When I put the netwerk adapter on top of the boot order, it starts iPXE >>>> and connects with the razor-server, but then I get this output: >>>> >>>> Red Hat Enterprise Linux 6 (Installed by Razor0 >>>>> Installation node: http://10.9.14.50:8150/api/nodes/6 >>>>> Installation repo: http://10.9.14.50:8150/svc/repo/centos-7/ >>>>> forcing local booting with sanboot 0x80 >>>>> Booting from SAN device 0x80 >>>>> Boot from SAN device 0x80 failed: Exec format error ( >>>>> http://ipe.org/2e852001) >>>>> Could not boot: Exec format error (http://ipxe.org/2e852001) >>>>> Could not boot image: Result too large (http://ipxe.org/46022001) >>>>> No more network devices >>>> >>>> >>>> Does anyone know how I can fix this? >>>> >>>> Thanks already! >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "puppet-razor" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at https://groups.google.com/group/puppet-razor. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> -- >>> PuppetConf 2016 <https://puppet.com/puppetconf>, 19 - 21 October, San >>> Diego, California >>> *Summer Savings - Register by 15 September and save $240 >>> <https://puppetconf2016.eventbrite.com/?discount=SummerSavings>* >>> >> -- > You received this message because you are subscribed to the Google Groups > "puppet-razor" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/puppet-razor. > For more options, visit https://groups.google.com/d/optout. > -- -- PuppetConf 2016 <https://puppet.com/puppetconf>, 19 - 21 October, San Diego, California *Register to attend or sign up to view the Live Stream <https://puppet.com/puppetconf/registration-pricing>* -- You received this message because you are subscribed to the Google Groups "puppet-razor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/puppet-razor. For more options, visit https://groups.google.com/d/optout.
