Hi Scott, When I just remove the sanboot command I get this output:
forcing local booting with sanboot 0x80 exiting iPXE and continuing to next firmware boot device > successfully completed the chain-loaded script; booting locally with 'exit' > No more network devices Kind regards, Alexander Op vrijdag 19 augustus 2016 09:48:16 UTC+2 schreef Alexander Cogneau: > > Hi Scott, > > Thank you for your response, I'll look into the thread. > > I am using a Cisco UCS C220 M4 Rack Server: > > http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-c220-m4-rack-server/index.html > > Kind regards, > Alexander > > > Op donderdag 18 augustus 2016 18:40:18 UTC+2 schreef Scott McClellan: >> >> Hi Alexander, >> >> It looks like this might be a problem with sanboot. This thread may be of >> interest to you: >> https://groups.google.com/forum/#!topic/puppet-razor/QtHA7Kfa-II — The >> solution provided there is around overriding the boot_local.erb file to get >> around (essentially remove) the sanboot ipxe command. >> >> Can you tell me a bit about the hardware you are using, to see if you >> have hardware similar to the thread above? >> >> Hope that helps! >> >> Scott >> >> On Fri, Aug 12, 2016 at 11:31 AM Alexander Cogneau <[email protected]> >> wrote: >> >>> Hi all, >>> >>> I've succesfully installed and configured razor-server (at least I hope >>> so) and I'm trying to let them boot CentOS 7. I created the policy, tags, >>> repo ... and when it boots the first time CentOS is installed (with the >>> default Centos/7.task). But then it goes wrong. I know that CentOS is >>> installed succesfully because when I put the HDD on top in the boot order, >>> the CentOS installation boots without doing DHCP and PXE. >>> >>> When I put the netwerk adapter on top of the boot order, it starts iPXE >>> and connects with the razor-server, but then I get this output: >>> >>> Red Hat Enterprise Linux 6 (Installed by Razor0 >>>> Installation node: http://10.9.14.50:8150/api/nodes/6 >>>> Installation repo: http://10.9.14.50:8150/svc/repo/centos-7/ >>>> forcing local booting with sanboot 0x80 >>>> Booting from SAN device 0x80 >>>> Boot from SAN device 0x80 failed: Exec format error ( >>>> http://ipe.org/2e852001) >>>> Could not boot: Exec format error (http://ipxe.org/2e852001) >>>> Could not boot image: Result too large (http://ipxe.org/46022001) >>>> No more network devices >>> >>> >>> Does anyone know how I can fix this? >>> >>> Thanks already! >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "puppet-razor" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at https://groups.google.com/group/puppet-razor. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> -- >> PuppetConf 2016 <https://puppet.com/puppetconf>, 19 - 21 October, San >> Diego, California >> *Summer Savings - Register by 15 September and save $240 >> <https://puppetconf2016.eventbrite.com/?discount=SummerSavings>* >> > -- You received this message because you are subscribed to the Google Groups "puppet-razor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/puppet-razor. For more options, visit https://groups.google.com/d/optout.
