"DERUMIER, Alexandre" <alexandre.derum...@groupe-cyllene.com> writes:
>>> * dnsmasq and IPv6 (and DHCP in general) do not really play well
>>>together,
>>> so using subnets with IPv6 configured is wonky
>
> I didn't have tested yet, but it's seem that dnsmasq only support old
> classic duid reservation and not mac ?
>
I tested the DHCPv6 setup now and unfortunately it does not work fully.
I have a VNet with both IPv4 and IPv6 subnets.
The IPAM part works correctly, registering both IPv4 and IPv6.
In the VM I can get an IPv4 from the DHCP but IPv6 does not work.
I only get a /128 address but I configured a /64 subnet.
For dual stack as well as only IPv6. Here my setup for only IPv6:
subnet.cfg:
subnet: DHCPNAT3-dead:beef::-64
vnet dhcpnat3
dhcp-range start-address=dead:beef::100,end-address=dead:beef::200
gateway dead:beef::1
Upon adding a VM, I get an IP [dead:beef::100]
ethers file looks correct according to your syntax with:
BC:24:11:24:5F:AD,[dead:beef::100]
In a VM (archiso) I run `dhclient -6 ens19`, and get the following IP
assigned:
dead:beef::100/128
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
