No, they do not.
Follow these steps from the wiki:
LVM Groups with Network Backing
In this configuration, network block devices (iSCSI targets) are used as
the physical volumes for LVM logical volume storage. This is a two step
procedure and can be fully configured via the web interface.
1. First, add the iSCSI target. (On some iSCSI targets you need to add
the IQN of the Proxmox VE server to allow access.)
- Click 'Add iSCSI Target' on the Storage list
- As storage name use whatever you want but take care, this name
cannot be changed later.
- Give the 'Portal' IP address or servername and scan for unused
targets
- disable 'use LUNs direcly'
- Click save
2. Second, add LVM group on this target.
- Click 'Add LVM Group' on the Storage list
- As storage name use whatever you want but take care, this name
cannot be changed later.
- For 'Base Storage', use the drop down menu to select the previously
defined iSCSI target.
- For 'Base Volume' select a LUN
- For 'Volume Group Name' give a unique name (this name cannot be
changed later).
- Enable shared use (recommended)
- Click save
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
