I don't know... Perhaps I misconfigurate something... But I tried with another iSCSI Target Software ( Iscsi Enterprise Target - IET ) but still have the same behavior: I cannot change disk format...
2014-07-10 11:54 GMT-03:00 Gilberto Nunes <[email protected]>: > Hi Yannis.... > > I have follow all those steps that you pointed to me on your last reply... > Well, in fact, I already do it in other physical server before, but > without success.... > > When I attempt to create a VM, I cannot choose Format to my VM disk, as > you can see bellow: > > > > > Some other advices?? > > Thank you > > > 2014-07-10 11:31 GMT-03:00 Gilberto Nunes <[email protected]>: > > yep... I just do it right now... But I need to reboot both nodes, because >> qorum disk go to offline... >> >> I will post results later... Stay tuned =) >> >> >> 2014-07-10 11:29 GMT-03:00 Yannis Milios <[email protected]>: >> >> No, they do not. >>> Follow these steps from the wiki: >>> >>> LVM Groups with Network Backing >>> >>> In this configuration, network block devices (iSCSI targets) are used as >>> the physical volumes for LVM logical volume storage. This is a two step >>> procedure and can be fully configured via the web interface. >>> >>> 1. First, add the iSCSI target. (On some iSCSI targets you need to >>> add the IQN of the Proxmox VE server to allow access.) >>> - Click 'Add iSCSI Target' on the Storage list >>> - As storage name use whatever you want but take care, this name >>> cannot be changed later. >>> - Give the 'Portal' IP address or servername and scan for unused >>> targets >>> - disable 'use LUNs direcly' >>> - Click save >>> 2. Second, add LVM group on this target. >>> - Click 'Add LVM Group' on the Storage list >>> - As storage name use whatever you want but take care, this name >>> cannot be changed later. >>> - For 'Base Storage', use the drop down menu to select the >>> previously defined iSCSI target. >>> - For 'Base Volume' select a LUN >>> - For 'Volume Group Name' give a unique name (this name cannot be >>> changed later). >>> - Enable shared use (recommended) >>> - Click save >>> >>> >> >> >> -- >> Gilberto Ferreira >> > > > > -- > Gilberto Ferreira > -- Gilberto Ferreira
_______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
