yep... I just do it right now... But I need to reboot both nodes, because qorum disk go to offline...
I will post results later... Stay tuned =) 2014-07-10 11:29 GMT-03:00 Yannis Milios <[email protected]>: > No, they do not. > Follow these steps from the wiki: > > LVM Groups with Network Backing > > In this configuration, network block devices (iSCSI targets) are used as > the physical volumes for LVM logical volume storage. This is a two step > procedure and can be fully configured via the web interface. > > 1. First, add the iSCSI target. (On some iSCSI targets you need to add > the IQN of the Proxmox VE server to allow access.) > - Click 'Add iSCSI Target' on the Storage list > - As storage name use whatever you want but take care, this name > cannot be changed later. > - Give the 'Portal' IP address or servername and scan for unused > targets > - disable 'use LUNs direcly' > - Click save > 2. Second, add LVM group on this target. > - Click 'Add LVM Group' on the Storage list > - As storage name use whatever you want but take care, this name > cannot be changed later. > - For 'Base Storage', use the drop down menu to select the > previously defined iSCSI target. > - For 'Base Volume' select a LUN > - For 'Volume Group Name' give a unique name (this name cannot be > changed later). > - Enable shared use (recommended) > - Click save > > -- Gilberto Ferreira
_______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
