Hi Becky, As replacement for macfuse I've used fuse4x at http://fuse4x.github.com, as advised by John Chandy. I downloaded and installed Xcode, gettext and pkg-config. Fuse4X installs in usr/local/lib, I had to make symlinks to /usr/lib because otherwise fuse.pc isn't found. Downloaded the 2.8.6 tarball ./configure --prefix=/usr --disable-usrint --enable-fuse make
NOW MY BLUNDER, SHAME SHAME on ME ---------------------------- copied pvfs2fuse to /usr/bin complained it didn't work Ough Ough ---------------------------- Did "sudo make install" AND EVERYTHING WORKS AS EXPECTED My excuses for all the fuzz. Henk Schoneveld PS. did CC the list ;-) On Jul 31, 2012, at 3:26 PM, Becky Ligon wrote: > Henk: > > Can you send me your pvfs2tab file, your PVFS conf file, and the version of > fuse that you are using? My understanding is that OSX fuse is no longer > supported, so there is a 3rd party "fuse" that you have to use. I will find > out the details for you. > > Becky > > On Tue, Jul 31, 2012 at 4:15 AM, Henk D. Schoneveld <[email protected]> > wrote: > > On Jul 30, 2012, at 11:17 PM, Becky Ligon wrote: > > > Henk: > > > > Can you post your output to this list? > Of course happy to do that. > > [E 19:01:35.647450] PVFS_isys_fs_add: Failed to initialize any appropriate > BMI methods for addresses: > [E 19:01:35.648604] ??? > [E 19:01:35.648645] PVFS_isys_fs_add call: Protocol not available > [E 19:01:35.648680] ERROR: could not initialize any file systems in > /etc/pvfs2tab. > PVFS_util_init_defaults: Operation not supported by device (error class: 0) > > pvfs2fuse and exactly the same pvfs2tab under linux works as expected. > > Any more hints ? > > By the way I patched state-machine-fns.c with > > @@ -229,7 +229,9 @@ > { > gossip_err("SM current state or trtbl is invalid " > "(smcb = %p)\n", smcb); > +#ifdef GOSSIP_ENABLE_BACKTRACE > gossip_backtrace(); > +#endif > assert(0); > return -1; > } > > Patch applied well. > > Kind regards > > > Henk > > > > > Thanks, > > Becky > > > > On Mon, Jul 30, 2012 at 4:50 PM, Henk D. Schoneveld <[email protected]> > > wrote: > > > > On Jul 30, 2012, at 7:34 PM, Becky Ligon wrote: > > > >> Great! So disabling usrint and enabling fuse was all you needed? > > Uhh to compile yes, but to use it it failed. Posted output to John Chandy. > >> > >> Becky > >> > >> On Mon, Jul 30, 2012 at 1:10 PM, Henk D. Schoneveld <[email protected]> > >> wrote: > >> Thanks a lot Becky, but John Chandy reacted already off-list. I did reply > >> my results to the list again. > >> But again thank you for being so helpful > >> > >> Henk Schoneveld > >> > >> > >> On Jul 30, 2012, at 5:50 PM, Becky Ligon wrote: > >> > >>> Henk: > >>> > >>> We do have a developer who has worked with OSX with the fuse client. I > >>> am going to forward your email to him and let him help you with the > >>> details. > >>> > >>> Becky Ligon > >>> > >>> > >>> On Sun, Jul 29, 2012 at 11:20 PM, John Chandy <[email protected]> > >>> wrote: > >>> Henk, > >>> > >>> If all you are looking for is the fuse client, you should be able to add > >>> "--disable-usrint" and "--enable-fuse" when you do the configure. > >>> > >>> If you want the user POSIX and stdio libraries, it looks like you'll have > >>> to make some minor fixes to the usrint code so that it compiles on > >>> MacOSX. I'm not sure if the OrangeFS developers are testing on MacOSX. > >>> > >>> John. > >>> > >>> On Jul 29, 2012, at 6:26 PM, Henk D. Schoneveld wrote: > >>> > >>>> John, > >>>> > >>>> Thanks for your answer. > >>>> > >>>> Installed xcode, Fuse4X, gettext and pkg-config, I'm able to configure > >>>> orange-fs2.8.6, but make fails with > >>>> > >>>> CC src/client/sysint/mgmt-get-uid-list.o > >>>> CC src/client/usrint/posix-pvfs.o > >>>> In file included from src/client/usrint/posix-pvfs.c:13: > >>>> src/client/usrint/usrint.h:227: warning: type defaults to ‘int’ in > >>>> declaration of ‘off64_t’ > >>>> src/client/usrint/usrint.h:227: error: expected ‘;’, ‘,’ or ‘)’ before > >>>> ‘offset’ > >>>> src/client/usrint/usrint.h:229: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or > >>>> ‘__attribute__’ before ‘ftell64’ > >>>> In file included from src/client/usrint/posix-pvfs.c:14: > >>>> src/client/usrint/posix-ops.h:35: error: expected declaration specifiers > >>>> or ‘...’ before ‘off64_t’ > >>>> > >>>> Any hints on what I did wrong or miss are very welcome > >>>> > >>>> Henk > >>>> On Jul 28, 2012, at 10:33 PM, John Chandy wrote: > >>>> > >>>>> Henk, > >>>>> > >>>>> pvfs2fuse was built work on OSX with Macfuse from > >>>>> http://code.google.com/p/macfuse. It used to compile 3-4 years ago > >>>>> when I last looked at it, but since macfuse hasnt been updated since > >>>>> 2009, I don't know if it still works. There is a replacement for > >>>>> macfuse called fuse4x at http://fuse4x.github.com, but I've never > >>>>> tested pvfs2fuse with it, so you'll have to try it out and see if it > >>>>> works. > >>>>> > >>>>> As long as you have the gcc build environment (from xcode), building > >>>>> pvfs2fuse should be the same as you would do on a Linux machine. > >>>>> > >>>>> John. > >>>>> > >>>>> On Jul 28, 2012, at 2:13 PM, Henk D. Schoneveld wrote: > >>>>> > >>>>>> Hi all, > >>>>>> > >>>>>> Using five 2.8.6 metadata/io-servers en would like to use the storage > >>>>>> on an OSX machine. pvfs2fuse is the way to go. I know how to build > >>>>>> pvfs2fuse under linux, but have no idea how to get a working OSX > >>>>>> version. > >>>>>> Googled and read a modified fuse-library would be needed, which was > >>>>>> available on a now disapeared Zumastor. > >>>>>> > >>>>>> Could somebody be so kind to provide me a binary version ? BTW I do > >>>>>> need a 64bits version. > >>>>>> > >>>>>> I've never build something under OSX, setting things up just to build > >>>>>> pvfs2fuse would be a real pain I gues. > >>>>>> > >>>>>> Kind regards > >>>>>> > >>>>>> Henk Schoneveld > >>>>>> _______________________________________________ > >>>>>> Pvfs2-users mailing list > >>>>>> [email protected] > >>>>>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > >>>>> > >>>> > >>> > >>> > >>> _______________________________________________ > >>> Pvfs2-users mailing list > >>> [email protected] > >>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > >>> > >>> > >>> > >>> -- > >>> Becky Ligon > >>> OrangeFS Support and Development > >>> Omnibond Systems > >>> Anderson, South Carolina > >>> > >>> > >> > >> > >> > >> > >> -- > >> Becky Ligon > >> OrangeFS Support and Development > >> Omnibond Systems > >> Anderson, South Carolina > >> > >> > > > > > > > > > > -- > > Becky Ligon > > OrangeFS Support and Development > > Omnibond Systems > > Anderson, South Carolina > > > > > > > > > -- > Becky Ligon > OrangeFS Support and Development > Omnibond Systems > Anderson, South Carolina > > _______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
