I'm not sure what to tell you about trunk for production. I'm using AuthKit for an internal project, this is my first time using AuthKit, and we haven't even gotten to the permissions portion yet. Right now we just have it setup to require login for the whole application and have it authenticating against our Active Directory.
Check http://groups.google.com/group/authkit for more info on AuthKit and to ask about trunk. -r. On Wed, Sep 3, 2008 at 9:32 AM, Mark Mitchell <[EMAIL PROTECTED]> wrote: > > I'm using the last stable release, 0.4.0. > > I should probably get on the trunk, you think it's good for production > use? > > I'm using the sqlalchemy_044 driver from the trunk at the moment > anyhow. > > -Mark > > On Sep 2, 4:36 pm, "Rick Flosi" <[EMAIL PROTECTED]> wrote: > > Oh, I ran into that problem too. You might need a newer version or trunk. > > > > I'm using AuthKit>=0.4.1dev-r155 > > > > I'd have to dig up the emails to remember what the problem was, but it > was > > something to do with that flag only getting applied to either authorize > or > > authenticate, but not both. > > > > What version of AuthKit are you using? > > > > -r. > > > > On Tue, Sep 2, 2008 at 3:26 PM, Mark Mitchell <[EMAIL PROTECTED]> wrote: > > > > > Thanks! > > > > > That makes a lot of sense... I didn't know there was an > > > authkit.setup.enable flag. I still got an exception though with it > > > on: > > > > > Exception: Authenticate middleware not present > > > > > Which corresponded to my middleware.py's: > > > > > permission = ValidAuthKitUser() > > > app = authkit.authorize.middleware(app, permission) > > > app = authkit.authenticate.middleware(app, app_conf) > > > > > (the last line). > > > > > So I added the following to the shell.ini file you recommended > > > creating: > > > > > [app:main] > > > use = config:development.ini > > > *full_stack = false* > > > > > authkit.setup.enable=false > > > > > By setting the full_stack = false, it didn't even try to run the > > > authkit setup lines. I think I needed this b/c I have authkit > > > installed throughout all my application, not just for some > > > controllers, but requiring every action from every controller to have > > > a valid logged in user. > > > > > Thanks for getting me on the right track, hope this helps someone, > > > > > -Mark > > > > > On Aug 27, 10:30 am, "Rick Flosi" <[EMAIL PROTECTED]> wrote: > > > > What I've been doing is using a different config file for running the > > > paster > > > > shell. > > > > > > eg. shell.ini: > > > > > > [DEFAULT] > > > > debug = true > > > > email_to = [EMAIL PROTECTED] > > > > smtp_server = localhost > > > > error_email_from = [EMAIL PROTECTED] > > > > #sqlalchemy.default.echo = True > > > > > > [server:main] > > > > use = egg:Paste#http > > > > host = 0.0.0.0 > > > > port = 5000 > > > > > > [app:main] > > > > use = config:development.ini > > > > > > *# AuthKit Config > > > > # disable authkit for paster shell* > > > > *authkit.setup.enable = false* > > > > > > "authkit.setup.enable = false" will disable authkit for you. Then run > > > > `paster shell shell.ini`. > > > > > > Hope this helps in the short run. > > > > > > -r. > > > > > > On Tue, Aug 26, 2008 at 4:35 PM, Mark <[EMAIL PROTECTED]> wrote: > > > > > > > I installed authkit into my pylons app so it works across all > requests > > > > > of my site. Unfortunately, this makes the paster shell command not > > > > > work with the following error: > > > > > > > paste.fixture.AppError: Bad response: 401 Unauthorized (not 200 OK > or > > > > > 3xx redirect for /_test_vars) > > > > > > > (It's trying to HTTP GET /_test_vars which is protected by authkit > on > > > > > my site). > > > > > > > Is there a way to pass in authentication details? I've seen > previous > > > > > postings on this before but with no resolution (there was > resolution > > > > > for test fixture support but not for paster shell)... > > > > > > > Thanks, > > > > > > > -Mark > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "pylons-discuss" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/pylons-discuss?hl=en -~----------~----~----~----~------~----~------~--~---
