In-Reply-To: <[EMAIL PROTECTED]>
I am not sure Tony that you are thinking of an old-fashioned AT power
supply. The latter have 2 six pin plugs - i.e. no pins 14&15. They also
do not use a green wire. The only pin neither ground nor a given voltage
is the P(ower) G(ood) pin which is orange - but since this stabilises at
+5 VDC, I don't think that shorting to ground would be quite the thing
or am I wrong here?
Christopher Cave
-------- Original Message --------
*From:* Tony Firshman <[EMAIL PROTECTED]>
*To:* [EMAIL PROTECTED]
*Date:* Sat, 01 Dec 2007 17:25:02 +0000
Christopher Cave wrote:
> In-Reply-To: <[EMAIL PROTECTED]>
> Thanks Tony but what quite do you mean by describing the 'green' wire as
> relevant in this context. Am I missing something else here?
You are. The pin you short to black ground (15) is coloured green (pin
14).
What wire were you going to short to ground then? Not the red I hope (8-)#
Tony
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
[EMAIL PROTECTED] http://firshman.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
