--- On Wed, 10/12/08, Tony Firshman <[EMAIL PROTECTED]> wrote:
From: Tony Firshman <[EMAIL PROTECTED]>
Subject: Re: [Ql-Users] Aurora not starting
To: [EMAIL PROTECTED]
Date: Wednesday, 10 December, 2008, 8:58 AM
[EMAIL PROTECTED] wrote, On 10/12/08 08:38:
> Hi,
> I have a problem wih my Aurora, with unreliable starting when I switch
it on. I have located the problem is in the ATX power unit.
>
You have an AT power supply I bet, not an ATX.
>
> I started it about three weeks ago and left it switched on permantly, just
turning the monitor off when not using it, but it did get switched off yesterday
and now I cannot get it started.
>
> I cannot buy a new unit with 2 - 6pin connectors. They all have 20 pin
connectors.
>
> What can I do?.
>
>
Se my email I sent two days ago, Arnold. I have a second hand AT power
supply (with wired power switch) I can provide.
Some ATX power supplies *do* have the AT motherboard P10 but not the
other (P9?). However to get them working one has to connect the
'power'
wire on the ATX motherboard connector (green) to the adjacent black ground.
Tony
Hi Tony, I didn't get your e-mail and this moring I wondered if all was
well with the e-mail system because when I sent the e-mail to you I also sent a
copy to myself and I did not get either. I have just been spring cleaning my
contacts list as I noticed a redwarning message sayin one of my contact wasn't
formatted.Then I got your message.Anyway to mve forward if you let me know how
much the ATX cost I wiil send you a chequeCheers Arnold
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
[EMAIL PROTECTED] http://firshman.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
