[EMAIL PROTECTED] wrote:
Yes Tony, I have looked it up, and I can now see why you refer to the unit as
AT not ATX it is because of the connectors. I live and learn.
My faulty AT unit has the 2- 6way motherboard connectors a switchlead, diskdrive connectors, thats all.
If your unit will relace mine please send it
I will send you cash off as soon as you confirm it.
ATX ones are fine for the QL, as long as the backplane uses the Molex
(4-way) connectors, like Mplane and one grounds the power sense pin, or
uses it in an ATX case with the approriate power button.
I suspect you are using Qplane as you need P10/P11 connectors. I *hate*
those connectors, as it is perfectly easy to connect them the wrong way.
It is so long since I have used them, but don't they need the GND (black
cables) next to each other in the centre. Whoever designed them should
be shot. Maybe they have been (8-)#
Be *very* careful you connect them back correctly.
Come to think of it, why did you reach the conclusion it is a faulty
power supply?
I should be able to post it tomorrow.
Tony
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
