Thanks Tony for your reply. the ROM is JM. Yes I am using a SGC. I have three slots I can plug the SGC in to and I cannot see a bent pin in any of them.
Arnold ________________________________ From: Tony Firshman <[email protected]> To: [email protected] Sent: Saturday, 7 November, 2009 13:42:05 Subject: Re: [Ql-Users] aurora display Rich Mellor wrote, On 7/11/09 13:18: > [email protected] wrote: >> Hi, My aurora machine has stopped working >> >> When I switch on the monitor screen is all one colour ie red,green etc. >> >> I have changed the monitor, It seems to me the vertical control is not >> working either. >> >> I was having trouble with Qubide. I put my master floppy in to restore >> Qubide, but my floppy must be corrupt. I e-mailed Roy, but I have not had a >> response. >> >> Qubide will no longer do a 'make_dir' if the name exists and it will not >> operate' Store'. >> >> Please advise, >> >> Arnold >> _______________________________________________ >> QL-Users Mailing List >> http://www.q-v-d.demon.co.uk/smsqe.htm >> >> >> > Hi Arnold, > > I have spare disks for your QubIDE - which version ROM is used? > > It sounds to me as though your Gold Card or Super Gold Card is not plugged in > properly - have you checked all the connectors? > Indeed. It is very easy to bend pins at the edge and often they will short. If you have be very careful. You have only *one* chance as these pins are not malleable. I use two flat jewellers screwdrivers. The pins need to be quite straight to ensure a good connection. Tony -- QBBS (QL fido BBS 2:257/67) +44(0)1442-828255 [email protected] http://firshman.co.uk Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
