----- Original Message ----- From: "Ron Dunnett" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, May 20, 2002 9:53 PM Subject: Re: [ql-users] gold card and qubide
> Hi Mike, > > Yes I'm still here, but only as an onlooker now, dont have any QL equipment > at all now. Nice to hear from you, trust all is well. Surprised you haven't jumped into the 'debate' that is taking place on here. > > Gold Card has a 68000 processor on board and Super Gold Card has a 68020 on > board so the 68008 is defunct when either of these are plugged in to a > standard QL. Yes, you'll will be right, our problems with the gold cards, was fixed by fitting SGC in the machines. > > Mr Verbeek didnt mention if he had a Yellow boarded Gold Card or a Red > boarded Gold Card, cos there is a difference as noted in the Qubide manual. > > Ron > > ----- Original Message ----- > From: "Mike MacNamara" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, May 19, 2002 12:39 PM > Subject: Re: [ql-users] gold card and qubide > > > > Hi > > I thought removing the 68008 only applied to Super Gold Card, but > > was still required on the Gold Card? > > > > Nice to hear your still there Ron > > > > Regards > > > > Mike > > > > [EMAIL PROTECTED] > > > > www.macnamaras.com > > ----- Original Message ----- > > From: "henk verbeek" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Sunday, May 19, 2002 9:46 AM > > Subject: RE: [ql-users] gold card and qubide > > > > > > > I did this but i still have got the same problem. I also tried > > another power > > > supply but all i get is a blank screen after the first reset. > > Could it be > > > the ql is not getting enough power ? Has anyone got a setup > > like mine > > > working ? > > > > > > Henk Verbeek. > > > > > > -----Oorspronkelijk bericht----- > > > Van: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]Namens Ron Dunnett > > > Verzonden: vrijdag 17 mei 2002 20:03 > > > Aan: [EMAIL PROTECTED] > > > Onderwerp: Re: [ql-users] gold card and qubide > > > > > > > > > Remove the 68008 it is not needed anymore if you have a Gold or > > Super Gold > > > Card. > > > > > > That normally cures the problem you are having. > > > > > > Ron > > > > > > ----- Original Message ----- > > > From: "henk verbeek" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, May 17, 2002 1:36 PM > > > Subject: [ql-users] gold card and qubide > > > > > > > > > > Hello everyone, > > > > > > > > I have a standard ql with a qubide and a gold card. If i > > connect the gold > > > > card or the qubide separatly they work fine but as soon as i > > put them > > > > together (quibide first and after this the gold card at the > > left hand slot > > > > of my classic ql) the ql doesn't boot up anymore. > > > > I already tried the jumpersettings j3+j4+j5 and j3+j4 only > > but it still > > > > doesn't work. I know its possible to let them work together > > but how? Does > > > > anyone have a clue ? or do i have to buy an mplane or > > something like that > > > ? > > > > > > > > Henk Verbeek > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
