On Wed, Jan 14, 2004 at 02:55:21PM -0500, James Herschel wrote:Hello,
I've just installed qmail-scanner-1.20st and was looking at my /var/spool/qmailscan/qmail-queue.log file to see the difference when I turn on the minidebug option. I was alarmed to see scan times for certain
> Wed, 14 Jan 2004 14:36:48 -0500:5085: w_c: elapsed time from start 9.68652Wed, 14 Jan 2004 14:36:48 -0500:5085: +++ starting debugging for process 5085 by uid=100secs
That's not standard Q-S - that must be from the "st" patch - what does that refer to?
Wed, 14 Jan 2004 14:36:48 -0500:5085: SA: finished scan in 0.560265 secs - hits=2.4
SpamAssassin took 0.5 secs - not too bad.
> Wed, 14 Jan 2004 14:36:48 -0500:5085: ini_sc: elapsed time from start > 10.266434 secs > Wed, 14 Jan 2004 14:36:58 -0500:5085: ------ all finished. Total of > 10.295683 secs
Again - not standard Q-S...
Sorry, can't help - maybe the author of the "st" patch can shed some light?
Well the answer could be long..
First, the routing working_copy (w_c) has not been modified in my patch.
Last settember, when I was testing qs-1.2rc3 in one of my servers (I run 3 servers with qs), I realized that this version was slower than 1.16, even if I was running 1.2rc3 on a PentiumIII-1000 and 1.16 on a PentiumII-350, and I had posted to list some messages.
Then I track the problem sending the same message to both servers, and I found that 'it wasn't a problem'. Jason has added more features to the routine 'working_copy' and with some messages it took nearly 10-15 seconds, but this is not a problem it is just a fact.
In the patch I've left some of the checks I used to track the times:
... w_c: elapsed time from start 9.68652 secs
This is the elapsed time since qmail-scanner was invoked by qmail-smtpd till the end of the routine working_copy.
... ini_sc: elapsed time from start 10.266434 secs
Thi is the elapsed time since qmail-scanner was invoked till the end of init_scanners
... ------ all finished . Total of 10.295683 secs
This is the elapsed time since qmail-scanner was invoked till the end of qmail-scanner itself.
The others (clamscan, SA, p_s) are just the times elapsed for the single scanner routine.
I suggest James to search in the code (/var/qmail/bin/qmail-scanner.pl) for the texts that are in the log...
Regards
Salvatore
------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Qmail-scanner-general mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/qmail-scanner-general
