Did you restart "inetd" so that it would read the new configuration file?
Did you check the log to see if inetd was having problems starting qpopper? Butch At 02:42 AM 4/18/02, you wrote: >I installed the QPopper4.0.4 and followed the instructions in the manual. >I added the following line to /etc/inetd,conf: > >pop3 stream tcp nowait root /usr/local/sbin/popper qpopper -s > >I also checked /etc/services to ensure that pop3 had been included and >found the following line under the 'Network services, Internet style' > >pop3 110/tcp # Post Office Protocol - Version 3 > >According to the manual, this is correct, but when I try to telnet I >receive the following message: > >telnet: Unable to connect to remote host: Connection refused > >The manual states that this is because the port name pop3 is not the same >as the one in inetd.conf, but as the above demonstrates this is not the >case. > >Could you possibly help me with this? > >I am using > >QPopper4.0.4 >Solaris 8 > >Thanks. > >Ayasha TSTAR Internet, Inc | Making the Net Work Marble Falls, TX | Serving Blanco, Burnet, 830-693-6967 | Llano, and Mason Counties
