see below
Don't let what you cannot do interfere with what you can do!
 
Billy 
www.langfoundation.org

  ----- Original Message ----- 
  From: Merrill 
  To: [email protected] 
  Sent: Sunday, October 11, 2009 4:18 PM
  Subject: [QUAD-L] permolock


  Never heard or it.  Some power chairs are hard to fit if not impossible which 
I tend to think is what might be going on.  Ask another source to do it.

   


------------------------------------------------------------------------------

  From: Quadius [mailto:[email protected]] 
  Sent: Saturday, October 10, 2009 4:09 PM
  To: quad-list
  Subject: [QUAD-L] permolock

   

   I would like to hear from anyone having a permolock, but what I'm trying to 
find out is the following:
  Does this thing work well from the passenger side?  (The manager of the shop 
that has done my work tells me it is extremely difficult to get into, is this 
true?)
  Yes - there's very little clearance. I have a permolock on drivers side and 
it's really tight to get into. Braqun entervan. I have a new C500 with the new 
seating system  
  Does this system take the slack out of the suspension on the wheelchair? Yes, 
it locks it out.

  Is anyone using an ezlock with a Permobile?

  Just changed from EZlock (15 yrs), wanted the clearance on a new c500 with 
pin retract.
  If so, does the wheelchair bounce around a lot?

  No, the ride is a little bumpy.

  I presently have an ezlock already in my vehicle, but I don't want to install 
the bracket on the new wheelchair if I'd really don't want to use it later on.

  Yeah, had the same dilemma....$3500 to buy and install. Make sure it fits! I 
can tell you it's REALLY tight. In fact, when I'm not driving, to get into the 
passenger seat I have to go up the ramp backwards! The lock prevents the chair 
from doing 360 turn inside the van. Once in, it works really well, so far.

  I look forward to your feedback.
  Quadius
  PS I'm still waiting on some modifications to my wheelchair, but I am hopeful 
I will have it shortly.  I know it's taken an unbelievably long time, but there 
have been so many things go wrong with the process but I think it can only be 
my bad luck.

Reply via email to