I have one at the office. I'll email it to you tomorrow. Don't use a rubber coated cable, needs to be vinyl. The rubber coated from the hardware store doesn't work. Take advise from someone who went through it 5 times before I figured it out. Using a steel only cable is not a good idea as rust is corrosive. Cleaning the tracks is a must as is lubrication. Use WD-40 lubricant w/silicone. WD-40 in the blue can is NOT anything you want to use. Running the cable is a bugger, be prepared to say some nasty words, poop, shoot and dog dirt works well. I'll get it to you tomorrow. The cheapest, and usually stocked is M.I.T.S. in Glen Rock, Pa. In a message dated 10/13/2014 1:25:44 P.M. Eastern Daylight Time, [email protected] writes:
my cable on my automatic door came off…… I know I had the instruction paper on how it goes around pulleys but I can’ t find it my dealer can’t get me in until the 23rd which isn’t soon enough J does anyone have an instruction sheet or know how I can get one the dealer says it will take 2 hours which is b.s – it took less than 30 minutes the last time I had it done 2002 dodge grand caravan ims conversion nicki
