You should be able to create a LVM volume on the multipath device and assign the volume as physical storage.
Please try the following Download http://www.quadstor.com/vtlnext/physscan On the VTL system please run the following command. ./physscan > /tmp/physscan.out multipath -ll > /tmp/multipath.out Send us /tmp/physscan.out /tmp/multipath.out along with the diagnostics logs to [email protected] On Tue, Feb 21, 2017 at 9:41 PM, Milan Stubniak <[email protected]> wrote: > Hi, i would like to ask abouth my mpath disk. i have store pool created with > 5 multipath disk: > dm-3,dm-2,dm-1,dm-8,dm-0. > When i mapped new disk from storage lets say dm-10 and i pushed the button > rescan (physical storage tab), my disk dm-1 was N/A in that momment. > Probably problem with scan disk over ten (dm-10)? > > And i have another question, it is possible to have LVM disk on multipath > device? In LVM conf is parameter multipath_component_detection = 1. > > > Thank you for response. > > Regards, > > Milan. > > -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
