Can you try 3.0.13 from http://www.quadstor.com/vtl-extended-edition-downloads.html
On Tue, Feb 21, 2017 at 11:59 PM, QUADStor VTL Support <[email protected]> wrote: > Ok, we can see the problem at our end, the logs shouldn't be needed for now. > > On Tue, Feb 21, 2017 at 10:36 PM, QUADStor VTL Support > <[email protected]> wrote: >> You should be able to create a LVM volume on the multipath device and >> assign the volume as physical storage. >> >> Please try the following >> >> Download http://www.quadstor.com/vtlnext/physscan >> >> On the VTL system please run the following command. >> ./physscan > /tmp/physscan.out >> multipath -ll > /tmp/multipath.out >> >> >> Send us /tmp/physscan.out /tmp/multipath.out along with the >> diagnostics logs to [email protected] >> >> On Tue, Feb 21, 2017 at 9:41 PM, Milan Stubniak <[email protected]> wrote: >>> Hi, i would like to ask abouth my mpath disk. i have store pool created with >>> 5 multipath disk: >>> dm-3,dm-2,dm-1,dm-8,dm-0. >>> When i mapped new disk from storage lets say dm-10 and i pushed the button >>> rescan (physical storage tab), my disk dm-1 was N/A in that momment. >>> Probably problem with scan disk over ten (dm-10)? >>> >>> And i have another question, it is possible to have LVM disk on multipath >>> device? In LVM conf is parameter multipath_component_detection = 1. >>> >>> >>> Thank you for response. >>> >>> Regards, >>> >>> Milan. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "QUADStor VTL" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
