Ok, we can see the problem at our end, the logs shouldn't be needed for now.
On Tue, Feb 21, 2017 at 10:36 PM, QUADStor VTL Support <[email protected]> wrote: > You should be able to create a LVM volume on the multipath device and > assign the volume as physical storage. > > Please try the following > > Download http://www.quadstor.com/vtlnext/physscan > > On the VTL system please run the following command. > ./physscan > /tmp/physscan.out > multipath -ll > /tmp/multipath.out > > > Send us /tmp/physscan.out /tmp/multipath.out along with the > diagnostics logs to [email protected] > > On Tue, Feb 21, 2017 at 9:41 PM, Milan Stubniak <[email protected]> wrote: >> Hi, i would like to ask abouth my mpath disk. i have store pool created with >> 5 multipath disk: >> dm-3,dm-2,dm-1,dm-8,dm-0. >> When i mapped new disk from storage lets say dm-10 and i pushed the button >> rescan (physical storage tab), my disk dm-1 was N/A in that momment. >> Probably problem with scan disk over ten (dm-10)? >> >> And i have another question, it is possible to have LVM disk on multipath >> device? In LVM conf is parameter multipath_component_detection = 1. >> >> >> Thank you for response. >> >> Regards, >> >> Milan. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "QUADStor VTL" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
