The sense condition reported indicates that an end of tape was reached when trying to locate to a particular block on tape. We will send a build with debug enabled for locate. The issue might have been during writes to the tape earlier. Is this one of the affected tapes when there was a hardware problem on the FC side ?
Does an 'audit volume B10003L5' succeed ? On Wed, May 3, 2017 at 2:18 PM, Milan Stubniak <[email protected]> wrote: > Thanks for explanation, > > we have checktapeos set to "yes". I suppose it`s ok. > > The issue on TSM server error log: > > 05/02/17 18:13:29 ANR8302E (Session: 89368, Origin: WBBHVN01_STA) I/O > error > on drive DRV42 (mt2.8.0.1) with volume B10003L5 > (OP=LOCATE, Error Number=1104, CC=0, rc = 2865, > KEY= 08, > ASC=00, ASCQ= 05, > SENSE=70.00.08.00.00.00.00.0A.00.00.00- > .00.00.05.00.00.00, Description=An undetermined > error has > occurred). Refer to the IBM Tivoli Storage Manager > documentation on I/O error code descriptions. > (SESSION: > 89368 > > > M. > > > > On Wednesday, May 3, 2017 at 9:49:03 AM UTC+2, quadstor wrote: >> >> The warning is fine. The write command is terminated when the tape >> position is not at the append point, the server then would position >> the tape to appropriate append point and continue with the writes >> >> (https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.4/srv.reference/r_opt_server_checktapepos.html) >> >> Please attach the errors reported at TSM server end. >> >> On Wed, May 3, 2017 at 1:08 PM, Milan Stubniak <[email protected]> wrote: >> > Hi, >> > >> > in VTL servers log i see a lot of warning message: >> > >> > WARN: __tdrive_cmd_validate_write:2316 VTL Test1 drive 4 validate write >> > failed with error Operator selected write protect >> > >> > Sometimes it cause that TSM mark vtl-tape read-only. >> > >> > Any suggestion? >> > >> > Thanks. >> > >> > M. >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "QUADStor VTL" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
