Thanks, audit volume is still running , but without error. We dont known for sure if tape was affected byt previous HW issue .
the problem is when client try to write, so we are going to try write only to empty tape and we will see. We let you know. Regards, M. 2017-05-03 11:03 GMT+02:00 QUADStor VTL Support <vtlsupp...@quadstor.com>: > The sense condition reported indicates that an end of tape was reached > when trying to locate to a particular block on tape. We will send a > build with debug enabled for locate. The issue might have been during > writes to the tape earlier. Is this one of the affected tapes when > there was a hardware problem on the FC side ? > > Does an 'audit volume B10003L5' succeed ? > > On Wed, May 3, 2017 at 2:18 PM, Milan Stubniak <stubni...@gmail.com> > wrote: > > Thanks for explanation, > > > > we have checktapeos set to "yes". I suppose it`s ok. > > > > The issue on TSM server error log: > > > > 05/02/17 18:13:29 ANR8302E (Session: 89368, Origin: WBBHVN01_STA) I/O > > error > > on drive DRV42 (mt2.8.0.1) with volume B10003L5 > > (OP=LOCATE, Error Number=1104, CC=0, rc = 2865, > > KEY= 08, > > ASC=00, ASCQ= 05, > > SENSE=70.00.08.00.00.00.00.0A.00.00.00- > > .00.00.05.00.00.00, Description=An undetermined > > error has > > occurred). Refer to the IBM Tivoli Storage > Manager > > documentation on I/O error code descriptions. > > (SESSION: > > 89368 > > > > > > M. > > > > > > > > On Wednesday, May 3, 2017 at 9:49:03 AM UTC+2, quadstor wrote: > >> > >> The warning is fine. The write command is terminated when the tape > >> position is not at the append point, the server then would position > >> the tape to appropriate append point and continue with the writes > >> > >> (https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.4/ > srv.reference/r_opt_server_checktapepos.html) > >> > >> Please attach the errors reported at TSM server end. > >> > >> On Wed, May 3, 2017 at 1:08 PM, Milan Stubniak <stub...@gmail.com> > wrote: > >> > Hi, > >> > > >> > in VTL servers log i see a lot of warning message: > >> > > >> > WARN: __tdrive_cmd_validate_write:2316 VTL Test1 drive 4 validate > write > >> > failed with error Operator selected write protect > >> > > >> > Sometimes it cause that TSM mark vtl-tape read-only. > >> > > >> > Any suggestion? > >> > > >> > Thanks. > >> > > >> > M. > >> > > >> > -- > >> > You received this message because you are subscribed to the Google > >> > Groups > >> > "QUADStor VTL" group. > >> > To unsubscribe from this group and stop receiving emails from it, send > >> > an > >> > email to quadstor-vtl...@googlegroups.com. > >> > For more options, visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google Groups > > "QUADStor VTL" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to quadstor-vtl+unsubscr...@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "QUADStor VTL" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/quadstor-vtl/CWLqmN-dOgI/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > quadstor-vtl+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to quadstor-vtl+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
