It may also affect the clutch operation as it puts the release bearing 
closer to the centre plate.
However, i've seen at least one running Fiesta (cvh engine) with the 
plate missing.

Jim


Tony Vincent wrote:
> Mike,
>
> As far as I'm aware, the crank position sensor operates from the back of 
> the flywheel, which is bolted straight to the crank.
> The relative positions of the flywheel and the crank sensor shouldn't be 
> affected by presence/absence of the metal gasket.
>
> However, you should check the alignment of the starter motor and 
> ring-gear teeth - I'm using an MT75 box rather than T9, but I needed to 
> machine up a spacer plate for mounting the starter.
> (I carved up another starter to do this).
> With the metal gasket omitted, the starter spacer would be a different 
> thickness.
>
>
> If you can get a gasket, it would help a lot to keep all sorts of crud 
> out of your clutch and ring gear.  I'd recommend fitting one.
>
> Hope this helps.
>
> TonyV.
>
>
> In message <[EMAIL PROTECTED]>, MIke walton 
> <[EMAIL PROTECTED]> writes
>   
>> Hi guys
>> Can anybody tell me if you have to put the metal gasket between the 
>> type 9 gearbox and engine block of a 2 litre zetec and if you do will 
>> this afect the crank position sensor to operate? any advicethankfully 
>> recieved
>> Mike
>>     


--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to