I think you'll find it's more a case that the Mondeo (1.6,1.8 or 2.0) 
won't fit as it's larger and matchs the MTX75 gearbox.
Most of the Zetec Fiestas and Escorts use the smaller IB5 gearbox (same 
as all the CVH's) and hence the same size flywheel as the CVH.(and pinto 
i think).
Watch out though as few Escort 130ps 1.8 Zetecs did have the MTX75 
gearbox as well.
CVH or Zetec clutch should be ok, just check the release bearing types 
match, low lift or normal lift and the spigot bearing inner size.

Jim


MIke walton wrote:
> Thanks Jim ,Tony
> I will put the gasket in, by the way talking of clutches i know that 
> you have to use the flywheel from
> the 1800 zetec as the 2 litre one will not fit,but as i am useing the 
> gearbox from the sierra should i use the cvh clutch as well?
> Mike
>


--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to