But, as has already been mentioned, i can't see anything on the Heads up GPS module that mentions it's supply requirements and would agree that it almost certainly runs from a 12volt lighter socket. To make something obviously for a car that ran off 5 volts would be silly.
Jim Tony Vincent wrote: > On 25/11/2008 19:45:04, barnacle ([EMAIL PROTECTED]) wrote: > > Arnie, I don't see where it states it requires 5v? I'd be surprised if > > it didn't run off the car normal 13v, and sort out its own voltage > > regulation internally, particularly with the high-intensity LEDs it > > will require. > > > Maplin do a range of 5v regulators which would be suitable, as long as > you're not going to be drawing too much current. > > These are the 2amp versions, but there is a 3amp one as well. > They also do some which are designed specifically for automotive use, > although I think they're lower current (1amp?) > > http://www.maplin.co.uk/Module.aspx?ModuleNo=7939 > > > You do also need a couple of capacitors in the system, don't omit them > because the output voltage becomes unstable. > > Also, check the requirements for heat sinks, particularly if you're > running the devices anywhere near their rated maximum. Heat-conductive > paste (as used on computer heatsinks) is a good idea too. > > The datasheets (also available from Maplin on free download) should tell > you how much current you can safely draw without a heatsink. > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
