Presumably it's coming out again after 500 miles so I'd go with cheap 10/40 or 15/40 semi
Well, thats what I've done.Carlube I think it is On Thu, Dec 4, 2008 at 6:22 PM, Eddie Cooper <[EMAIL PROTECTED]>wrote: > > Hello all, I have just rebuilt my 2+2's RS turbo engine after the > Curborough oil leak fiasco, new crank bearings, big end bearings, > piston rings, cam shaft all seals and gaskets etc etc and cannot find > any reliable sources of info about what oil to use once its back in > the car. Depending on which RS owners club blog you read depends on > what oil to use or not to use. I was running Magnatec 10W 40 and until > most of the oil decided to leave the engine via the turbo feed hose. > Up until that I hadn't had any cause for concern. It coped with > Bruntigthorpe and Haynes ok along with some enthusiastic on road > driving. Any sugestions would be very welcome. > > Best regards > Eddie Cooper > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
