Stuart Poly bushes source 2 new wishbones with the correct ball joint type straight or tapered. ask a local garage to press out and in some poly units. (coffee money) To fit them it is easier to drop the two wishbone carriers. The front anti roll bar bushes are easy to fit at the same time cut off old ones pop on new ones. rear anti roll bar bushes are easy to do I replaced the metal 'P' clips on ours due to a broken one all easy bolt on parts. the main rear axle bushes I did not get round to doing. Electric windows - ours slowed up in thier dotage I did try to regrease them but did not help much. I did not investigate further but could possibly be a bad resistive earth or connector not allowing current flow, stiff rubbers or worn out motors. Creaking seat - try lubing the hooks that latch the seat, these can shimmy sideways and squeek when dry. Where are you in the UK again?
Gary Ex Q owner, but now a daddy! Stuart Carvell wrote: > Thanks for your reply, > > Ok if i made a list it would be. > > These are problems Eddie Ruskin has quoted for: > > * Faded gelcoat > * Leaking roof > * Loose roof > * Exhaust alignment issues > * Lots of rattles > * No carpets > * No sound deadening > * A few cracks here and there in gelcoat > > > I woulds probably also ask him to: > > * Fit speaker system > > > Other problems > > * Slow electic windows especially when they are both used at the > same time (not sure if its normal?) > * Constant squeek from cam belt area of engine, despite a number > of new pullies belts etc (The car has been to three garages for > this still no fix) > * Slightly vague steering, suspect universal joint (Problems with > gaining a replacement Ford sourced the replacement for the donor > but when it came it was incorrect. Not sure if the PAS > UJ/steering column is different?) > * Bushes I would like to replace them with Poly but think i > personally would struggle. > * Creeking drivers seat > > > The annoying thing is that this is almost the exact same list i would > have put on my Saloon when i sold it in 2008. The aim of the H4 was > to get away from problems. > > Anyway, > Stuff i have done recently > > * ST150 Brake upgrade > * Coilover suspension alround > * Refurbished alloy wheels > * Braided brake hoses > * New Seatbelts > * New Clutch Cable > * New Handbrake Cable > * New larger battery > * Reconditioned gearbox > * Reconditioned gear selector > > > As far as engine wise, its a 2.0 zetec that was rebuilt last Christmas > due to a headgasket failure. > > So going back to your original question, whats unreliable. The answer > this morning would be nothing (Touch wood). Its just im not confident > that the answer will be the same tomorrow. However its no fun to be > in due problems listed at the top. > > I also take your final point that the more i do the more reliable the > car will become. I guess what im hoping to do is rather than be > forced to fix a niggle at 8.30am on some wet morning in November, take > the car of the road and pre-empt any problems. > > To do this i currently think i need someones help, which might be > something as small as running a compression test on the engine and > explaining the results to me or as large as poly bushing the whole car > and being paid to do so. > > Hope that makes sense > Stuart > > > > > > > ------------------------------------------------------------------------ > From: [email protected] > To: [email protected] > Subject: [Quantum Owners] Re: Refurb my H4 > Date: Sun, 6 Sep 2009 21:41:37 +0100 > > Hi, > > What do you consider reliable? Perhaps put another way, what is > unreliable at the moment? > > Not considering the normal wear items (exhaust, brakes, tyres, springs > and dampers, lights) that leaves electrics, engine, bushes, &? > > My personal preference is fuel injection with programable ecu. Whilst > perhaps a carb engine is simpler and prefered by many I like the fact > I can get the ecu to tell me exactly what is going on with a connected > laptop. It was a very steep learning curve for me but I'm very glad I > did it. I've learned all sorts of basic engine/fuelling theory which > is facinating and quite useful. > > Quantum cars themself quoted me 3000 to supply and fit an 1800 16v > engine before we went DIY. I would suspect you are looking at a > similar figure for that level of work at one of the speciality kit car > mechanics places. I suspect they won't be completly re-doin the > electrics though for that sort of money. > > Perhaps some of the others know or have used som of the kit car places > that advertise in the mags? > > If you fix the niggles long enough with new good quality > parts then it normally gets more reliable. I got fed up with one last > job on my project off roader and sold it for 1/3 what it was worth. I > found the truck the other day and it's been totally reliable and with > the same owner for the last two years. I regret selling it now. So > stick with it! > > Matthew > > > > On 6 Sep 2009, at 17:32, Stuart Carvell <[email protected] > <mailto:[email protected]>> wrote: > > I would obviously be willing to pay someone for their time. What > i dont what to do is continue to pay my local garage once a month > to fix problems. > > As far as what tasks i want, im not really sure. My aim is that > by the time that the car hopefully goes to Eddie in January/ > February time it is not just roadworthy but reliable and reliable > for a period of time. > > I suppose the first bit of help i could do with would be for > someone to look over the car and say, "do this or leave that etc > etc..". > > Then the next step would be get the work done, either by paying > someone else (QOC member, recomended garage etc..) or by trying to > do it myself which i would struggle due to time, lack of > knowledge, lack of tools and only a driveway to work on. > > If i cant get the car reliable then i guess i would have to > rethink, which would probably take me down the tintop route and > that not where i want to go. > > Stuart > > > ------------------------------------------------------------------------ > From: [email protected] <mailto:[email protected]> > To: [email protected] > <mailto:[email protected]> > Subject: [Quantum Owners] Re: Refurb my H4 > Date: Sun, 6 Sep 2009 13:38:56 +0100 > > I guess the most important question is how much are you willing to > pay for the work and what tasks do you want, I guess you can go > for anything from a list of maintenance tasks to a complete rebuild. > > Matthew > > > > On 5 Sep 2009, at 14:17, Stuart Carvell <[email protected] > <mailto:[email protected]>> wrote: > > Hello, > > I'm wondering if anybody can help? > > I have been suffering with what can only be described as bad > luck with my H4 as per my QM article. Most jobs (suspension > being the excepion) i have done have not really moved the car > forward. One step forward and one and half back is definitely > true. > > My main problem is that i dont have enough understanding or > knowledge or time to fix most problems and my H4 is main daily > driver. > > Im currently in the situation where i have built up some money > and i would like to get the car refurbed so that i can run it > problem free for a period of time. > > I have spoken to Eddie Ruskin regarding paintwork, water > leaks and interior etc. He also has a contact who can sort > out my exhaust issues. I have spoken to Jim Hearne regarding > engine and mechanical work but he quite understandabley is > unable to help at the moment. > > Ideally what im looking for is for someone to take my H4 as a > project and go through it with a fine toothcomb. If thats not > possible then does anybody have any contacts who they would > recomend. > > I do have a very exciting Nissan Micra 1.0L Auto that i can > drive while the H4 is away and i dont mind where in the > country the H4 has to go if i know that progress is going to > be made. > > Thanks > Stuart > > > ------------------------------------------------------------------------ > Add other email accounts to Hotmail in 3 easy steps. Find out > how. <http://clk.atdmt.com/UKM/go/167688463/direct/01/> > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
