Hi Ian, I think mine only has a washer under the bolt head and a washer under the nyloc nut. The lower wishbone has 2x bushes and 1x insert fitted.
So the assembly order is: M10x100 bolt/ M10 Washer/ Upright/ Lower Wishbone with bushes and insert/ Upright/ M10 Washer/ Nyloc nut. The build manual makes reference to using M12 washers on the top mount so that the lugs are not bent. (Usaully takes 3 each side). But there is no mention of needing them on the bottom. Craig -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ian H (S3-023) Sent: 24 January 2010 18:21 To: Quantum Owners Group Subject: [Quantum Owners] Rear Upright on Xtreme - spacers? Hi guys, I have just got one of my rear uprights machined to allow me to use bolt on driveshafts. I am now in the process of refurbing the upright and have now stripped off the failing powder coating before applying some hammerite. I have noticed that the mount onto the bottom wishbones had no spacer washers, as are used at the top. In your builds have you used washers to pad things out? The reason I ask is that the bottom of the upright looks like it has been pulled in by the fixing bolt and I think it could take spacers if I straighten things out a bit... What do you think? Ian -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.730 / Virus Database: 271.1.1/2642 - Release Date: 01/24/10 07:33:00 -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
