Hi Alex I had this problem with my H4. When I fitted new wheels ( inset 38 I think) the tyre touched the front strut. By fitting 10mm spacers to give clearance I found that the wheel would not sit on the hub and the studs did not give accurate centering of the wheel. Fitting the minimum spacer to clear the strut (3mm) enabled the wheel to just locate onto the hub. This found after several revisits to the tyre shop! I suppose that the proper fix would be to fit concentric spacers. JimT
On Jun 7, 5:04 pm, Alexhopkins <[email protected]> wrote: > Just had the 2+2 serviced and had the tracking done. Now that i have > the car back i have found the wobble which was only small and was only > there between 60-65 is now a lot worse and does not go away. > Any ideas what this could be. > > Cheers > > Alex -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
