Do you have clock face overlays fitted, my H4 had a set of lockwood overlays fitted by a previous owner and several needles had been pushed to firmly back on giving sluggish and no movements accordingly, easing them all back slightly resulted in smooth and reliable movement. Regards Bill
On Jun 9, 11:30 pm, bilje55 <[email protected]> wrote: > I needed a new clutch, so tried to sort out my non functioning speedo > at the same time: it counted the miles, but rate of travel resolutely > remained at 0. With the "fit a replacement part" idea clearly in mind, > everything apart from the dash pod clock set itself has been > replaced....and now the speedo moves (improvement, yeah?) but winds up > very slowly and slows down equally slowly...as if it were seriously > heavily damped. I don't mind changing the clocks as well.....but does > anyone have any idea what might be the problem here ? > Thanks guys. Bill, new member in Frome, Somerset -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
