If you are running the standard Ford ecu i wouldn't mess with the cam
or throttle body.
It just upsets the ECU causes problems like stalling etc BTDT
The CVH throttle body is different, you need one from a silver top Zetec.
If you are using the plastic manifold then this was only in the Mondeo 2.0
I don't know about the diff.
Jim
On 02/08/2010 09:30, Paul F wrote:
Can any one help with a couple of questions after a trip to the local
scrap yard at the weekend.
I am still after the 2.0 cam and throttle body increase for my 1.8
zetec(98). i found a H reg XR3i with CHV engine. Is that the same
throtle body? and will it work with the 1.8 to give more air? Or does
it need to be from a sliver top zetec only?
There was also a scorpio 2.0 (i think) N reg with what looks alot like
the sierra diff that is on the xtream. Can any one confrim they are
the same. As if so i think i will get that as well. It is the one with
the bolt on drive shafts, so i am not sure if they will fit to the
xtream hub/wheels?
Any advice greatly recieved Then i can get back there.
Cheers
Paul
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
