The scorpio diff could well be the same as the Xtreme one. There are two main sizes of diff fitted to fords, 7 inch and 7.5 inch.
Xtremes take the 7 inch as standard. The size is the measurement across the top mount. The bolt on shafts can only be used if you have the disk brake rear uprights, as these are different from the drum brake uprights. Generally, you can have either: Disk brakes, lobro jointed (bolt on) shafts and a bolt on diff. or Drum brakes, tripode jointed (push in) shafts and a push in diff. There is a good diff resource on the locostbuilders site, scorpios are mentioned here. http://www.locostbuilders.co.uk/forum/9/viewthread.php?tid=85080 Having done a bit of work last winter to fit a LSD with bolt on shafts to a car with drum brakes, I can say that the route I took is probably not the easiest... Ian On 2 August 2010 11:13, Paul F <[email protected]> wrote: > Ok thanks Jim. > > I am running omex with the single plenum as made by old YKC now > Griffen power. > > Paul > > On 2 Aug, 09:40, Jim Hearne <[email protected]> wrote: > > If you are running the standard Ford ecu i wouldn't mess with the cam > > or throttle body. > > It just upsets the ECU causes problems like stalling etc BTDT > > > > The CVH throttle body is different, you need one from a silver top Zetec. > > If you are using the plastic manifold then this was only in the Mondeo > 2.0 > > > > I don't know about the diff. > > > > Jim > > > > On 02/08/2010 09:30, Paul F wrote: > > > > > > > > > Can any one help with a couple of questions after a trip to the local > > > scrap yard at the weekend. > > > > > I am still after the 2.0 cam and throttle body increase for my 1.8 > > > zetec(98). i found a H reg XR3i with CHV engine. Is that the same > > > throtle body? and will it work with the 1.8 to give more air? Or does > > > it need to be from a sliver top zetec only? > > > > > There was also a scorpio 2.0 (i think) N reg with what looks alot like > > > the sierra diff that is on the xtream. Can any one confrim they are > > > the same. As if so i think i will get that as well. It is the one with > > > the bolt on drive shafts, so i am not sure if they will fit to the > > > xtream hub/wheels? > > > > > Any advice greatly recieved Then i can get back there. > > > > > Cheers > > > Paul- Hide quoted text - > > > > - Show quoted text - > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
