hi all the 2+2 is coming along nicely with only a few small jobs left before I turn the key, today was suspension bolting on day, I remember when I stripped the car I noticed that the box section where the inner pivot bushes for the lower arm seemed a little "pinched" inwards, almost as if the bush was too short or the box section was too wide between side to side.
today ive fitted up the new arm with new poly bushes and it was a sung fit within the box section implying that this bush is the same size as the old one but the box section still looks pinched in slightly. should there be a spacer between both or one side of the bush?, it looks like a 3mm shim would do it but I don't want to do something I shouldn't. has anyone else had such issue or noticed this? cheers all. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
