hmm, to pinch ot not to pinch? there is definate pinching going on here on mine, luckely ive only fitted one side, ill measure up the upper portion of the box and measure up the length of the inner track bush which should give me a distance, if its greater than 2mm ill shim it either side
cheers for the input ill keep you posted On 11 Sep, 22:10, Jim Hearne <[email protected]> wrote: > I've built or rebuilt 3 2+2's and none have washers there or noticably > pinched. > They have always been a very good fit on the bushes for me. > > Jim > > On 11/09/2010 21:55, hansdefauwes wrote: > > > > > I remember putting a washer in. > > either a washer or pich it - so I chose for a washer. > > > Hans > > > ----- Original Message ----- From: "Jim Hearne" <[email protected]> > > To: <[email protected]> > > Sent: Saturday, September 11, 2010 10:47 PM > > Subject: Re: [Quantum Owners] inner track arm bush spacer? > > > No, there aren't any spacers or washers in there normally. > > > Jim > > > On 10/09/2010 18:23, jin wrote: > >> hi all > >> the 2+2 is coming along nicely with only a few small jobs left before > >> I turn the key, > >> today was suspension bolting on day, > >> I remember when I stripped the car I noticed that the box section > >> where the inner pivot bushes for the lower arm seemed a little > >> "pinched" inwards, almost as if the bush was too short or the box > >> section was too wide between side to side. > > >> today ive fitted up the new arm with new poly bushes and it was a sung > >> fit within the box section implying that this bush is the same size as > >> the old one but the box section still looks pinched in slightly. > > >> should there be a spacer between both or one side of the bush?, it > >> looks like a 3mm shim would do it but I don't want to do something I > >> shouldn't. > > >> has anyone else had such issue or noticed this? > > >> cheers all.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
