I remember putting a washer in.
either a washer or pich it - so I chose for a washer.
Hans
----- Original Message -----
From: "Jim Hearne" <[email protected]>
To: <[email protected]>
Sent: Saturday, September 11, 2010 10:47 PM
Subject: Re: [Quantum Owners] inner track arm bush spacer?
No, there aren't any spacers or washers in there normally.
Jim
On 10/09/2010 18:23, jin wrote:
hi all
the 2+2 is coming along nicely with only a few small jobs left before
I turn the key,
today was suspension bolting on day,
I remember when I stripped the car I noticed that the box section
where the inner pivot bushes for the lower arm seemed a little
"pinched" inwards, almost as if the bush was too short or the box
section was too wide between side to side.
today ive fitted up the new arm with new poly bushes and it was a sung
fit within the box section implying that this bush is the same size as
the old one but the box section still looks pinched in slightly.
should there be a spacer between both or one side of the bush?, it
looks like a 3mm shim would do it but I don't want to do something I
shouldn't.
has anyone else had such issue or noticed this?
cheers all.
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
