Ah Exhaust
I had one made by longlife to mate to the cat. really good finish.
Some (magnetex??) exhausts were based on the 1.4 fiesta that have
hangers in the wrong places.
The other thing to bear in mind is to have the centre section 'keyed' to
the cat/decat pipe.
on the back of the cat i had a lug / lump. The centre section had a
larger clamp slot than the other side.
with these locked together it stops the centre section rotating so holds
it up in the tunnel.
without this keyway the furthest part under the pass side floor drops
down under it's own weight.
Poor design.
Gary
Qless
On 28/09/2010 19:53, Sam wrote:
Hi,
Im looking to make a few mods to my H4 to make it a little more
useable, firstly the exhaust which was home made from bits and pieces
doesnt fit very well in the tunnel and so hangs low, as well as being
loud, could anyone recommend a replacement and supplier? preferably
stainless and not too loud, it would need to be from the de-cat pipe
backwards.
The suspension currently is a GMax set up, I think lowered 35mm over
standard, which with the low hanging exuast makes clearance an issue.
Im thinking of switching to standard springs, could anyone recommend
which model to go for and where to get them from?
Also the bushes in the front wishbones are on their way out, where is
the best place to get the wishbones from?
Sorry for all the questions, thanks in advance, Sam.
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
