putting poly bushes in certainly improved the response but did have an
anti roll bar (across the back of the engine bay by steering rack)
did these at the same time. probably harshened the ride but not to a
highly noticeable degree. sorted the handling no end. as mentioned
before drop the wishbone carriers to fit the arms into them first
otherwise you will fruitlessly struggle for ages to align them up.
Gary
Qless
On 10/02/2011 14:58, Jim Turner wrote:
I am going to replace both of the front wishbones on my H4. The
existing ones appear to be three bolt straight ball joints, rather
than the offset ball joints of the XR2i. Are they interchangeable ( I
intend to change both sides)& is there any advantage to be gained?
The springs& shocks are XR2i but there is no anti roll bar fitted. Do
I need one? Also are poly bushes a good idea or would they make the
ride too hard?
JimT
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
