I had a lot of fun with these as well.
The main thing is to put them where the R clip on each side stops the
transfer bar moving too far side to side.
And that the R clip bears against the larger side of the top hat plastic
bushes.
You could have them both on the outside or both on the inside of the
brackets but obviously not both on the same side.
I think i actually drilled a new R clip hole n the tube on my 2+2 to get
it right.
Jim
On 31/12/2011 18:36, jin wrote:
hi all
firstly let me all wish you a happy new year for when it happens
have a good one.
onto my question
i took this pic as i was going to ask why the pedal shaft was jamming
and sat to one side on the through hole in the bulkhead
[IMG]http://i120.photobucket.com/albums/o192/jindal/DSC02339.jpg[/IMG]
couldn't work it out as everything seemed to line up in front and
behind the bulkhead but the pedal push rod was pulling the tranfer bar
to one side
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
