ok so all is going well enough but ive come up against another head scratcher
ive cut out a square stainless plate to mount between the bulkhead and servo mounting brackets, (exactly as I have done on the pedal side) I used a straight edge across the front of the car using the upper most sub frame mounting holes as a datum and held the plate secure while scribing through the bulkhead to mark the 4 servo mounting bracket holes Once I removed the plate it became clear that something was amiss, the holes were out of square with each other in relation to the stainless plate which is itself square and was held square to the bulkhead My main question is...... Are the servo brackets to bulkhead holes supposed to be exactly square to each other? I thought it best to ask before o go elongating holes my only doubt for this was brought about by realising that the actual servo to servo mounting holes appear to be not "square" in relation to each other, by which I mean if you line the 2 brackets parallel side by side to each other the PCD of the servo to bracket holes would make a trapezium shape and not square if that makes sense? Trouble is my bulkhead scribe marks are long gone so I have no reference Mine is the type A / low spec setup Cheers in advance -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
