Sorry.....me again....got a bit of an odd wiring problem that I came across whilst trying to fix the intermittent dip beam problem (still not fixed that one)....I found a badly blown fuse (completely desroyed) in the main box....fuse #6 which according to the Fiesta manual is the rad fan...hard short to ground when checked with a meter on the load side....anyway, it looks like the fan switch is connected to non-standard Fiesta wiring which I traced back to a connection spliced in to what I believe is the anti overrun valve on the back of the carb which is in turn connected to a black lead from the standard loom....however none of this appears to be short to ground so I'm guessing fuse #6 might be connected to something else.... Anyone know offhand if this might be the case an if so, what. Also, going back to the original low beam problem, does anyone know where the three headlight relays might be located so I can trace the wiring
-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
