Is this on an H4 ?
The 2+2 and saloon usually just use Mk2 Fiesta manual window winders.
Bending the bottom of the runners was the early modification, the later
later mod was shortening the runner and adding the spacers.
Of course if it's easy to get new cables made nowadays you could just
get a new cable, shorten the runner and not need the spacers.
Jim
On 07/04/2012 12:05, Mark wrote:
Thanks Jim.
I'm replacing manual winders which have the bend on the bottom of the
runner & thus has 'cut' through & is starting to snag.
I take it as long as I avoid black runners then I'll be ok?
Mark
On Friday, April 6, 2012 7:05:48 PM UTC+1, Jim Hearne wrote:
Yes, they will work as well.
Make sure they are the same type as you have, the later ones have
black
runners and are a different design.
Jim
On 06/04/2012 14:34, Mark wrote:
> I've been searching for some 3 door mk3 fiesta electric window
> mechanisams. Have seen them on ebay, but keep missing them.
> Is it possible to use 5 door units with the spacer mod? Not too
> concerned if I have to put new holes in for locating.
> Thanks
> Mark
> --
> You received this message because you are subscribed to the Google
> Groups "Quantum Owners Group" group.
> To post to this group, send email to
[email protected] <mailto:[email protected]>
> To unsubscribe from this group, send email to
> [email protected]
<mailto:[email protected]>
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
<http://groups.google.com/group/quantumowners?hl=en>
>
> IMPORTANT NOTE: All information presented herewith is provided
on an
> "As Is" basis, without warranty or the implication thereof. Neither
> the Quantum Owners Club nor the individuals associated with the
> Quantum Owners Club or in the preparation of the above information
> shall have any liability to any person or entity with respect to
> liability, loss, or damage caused or alleged to be caused
directly or
> indirectly by the instructions contained within this or related
> message(s).
--
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an
"As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the
Quantum Owners Club or in the preparation of the above information
shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or
indirectly by the instructions contained within this or related
message(s).
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
