Thats an interesting arrangement, you've got manual Mk3 Fiesta lifter
mechanisms and then an aftermarket electric window kit fitted to that.
Would be much easier to replace it all with Ford electric window mechs.
I'm guessing that's what you are going to do.
Jim
On 10/04/2012 13:26, Mark wrote:
Eddie,
I have hopefully attached a couple of pictures of what I have. Hope it
makes sense. The only bit not on there is the motor, which is still in
the door. I won't bin them if you feel they may be of some use to you.
Mark
On Sunday, April 8, 2012 12:08:13 AM UTC+1, Eddie wrote:
Hi Mark
The motor drive you talk about, are they black boxes that mount on
the
door card to conceal the motor?
Hopefully they should also have a switch mounted on the top to
operate
the windows.
If I have described what you have, could you confirm please. If you
are considering chafing them for proper electric windows, I could re
home what you have as I need them to restore my Mk1 Quantum Hatchback
Thanks
Eddie
On Apr 7, 1:50 pm, Mark <[email protected]> wrote:
> Sorry, it a saloon.
> It has a remote motor to drive the manual mechanisam. Will try &
get a
> picture up.
> The cables are fine, the cut is where the cable has rubbed
through at the
> bend. I got some spacers made up to try & salvage what I've got,
but no
> luck.
>
> Mark
>
>
>
>
>
>
>
> On Saturday, April 7, 2012 12:34:20 PM UTC+1, Jim Hearne wrote:
> > Is this on an H4 ?
> > The 2+2 and saloon usually just use Mk2 Fiesta manual window
winders.
> > Bending the bottom of the runners was the early modification,
the later
> > later mod was shortening the runner and adding the spacers.
> > Of course if it's easy to get new cables made nowadays you
could just get
> > a new cable, shorten the runner and not need the spacers.
>
> > Jim
>
> > On 07/04/2012 12:05, Mark wrote:
>
> > Thanks Jim.
>
> > I'm replacing manual winders which have the bend on the bottom
of the
> > runner & thus has 'cut' through & is starting to snag.
> > I take it as long as I avoid black runners then I'll be ok?
>
> > Mark
>
> > On Friday, April 6, 2012 7:05:48 PM UTC+1, Jim Hearne wrote:
>
> >> Yes, they will work as well.
> >> Make sure they are the same type as you have, the later ones
have black
> >> runners and are a different design.
>
> >> Jim
>
> >> On 06/04/2012 14:34, Mark wrote:
> >> > I've been searching for some 3 door mk3 fiesta electric window
> >> > mechanisams. Have seen them on ebay, but keep missing them.
> >> > Is it possible to use 5 door units with the spacer mod? Not
too
> >> > concerned if I have to put new holes in for locating.
> >> > Thanks
> >> > Mark
> >> > --
> >> > You received this message because you are subscribed to the
Google
> >> > Groups "Quantum Owners Group" group.
> >> > To post to this group, send email to
[email protected]
<mailto:[email protected]>
> >> > To unsubscribe from this group, send email to
> >> > [email protected]
<mailto:[email protected]>
> >> > For more options, visit this group at
> >> >http://groups.google.com/group/quantumowners?hl=en
<http://groups.google.com/group/quantumowners?hl=en>
>
> >> > IMPORTANT NOTE: All information presented herewith is
provided on an
> >> > "As Is" basis, without warranty or the implication thereof.
Neither
> >> > the Quantum Owners Club nor the individuals associated with
the
> >> > Quantum Owners Club or in the preparation of the above
information
> >> > shall have any liability to any person or entity with
respect to
> >> > liability, loss, or damage caused or alleged to be caused
directly or
> >> > indirectly by the instructions contained within this or
related
> >> > message(s).
>
> > --
> > You received this message because you are subscribed to the
Google Groups
> > "Quantum Owners Group" group.
> > To post to this group, send email to
[email protected]
<mailto:[email protected]>
> > To unsubscribe from this group, send email to
> > [email protected]
<mailto:[email protected]>
> > For more options, visit this group at
> >http://groups.google.com/group/quantumowners?hl=en
<http://groups.google.com/group/quantumowners?hl=en>
>
> > IMPORTANT NOTE: All information presented herewith is provided
on an "As
> > Is" basis, without warranty or the implication thereof.
Neither the Quantum
> > Owners Club nor the individuals associated with the Quantum
Owners Club or
> > in the preparation of the above information shall have any
liability to any
> > person or entity with respect to liability, loss, or damage
caused or
> > alleged to be caused directly or indirectly by the
instructions contained
> > within this or related message(s).
--
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an
"As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the
Quantum Owners Club or in the preparation of the above information
shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or
indirectly by the instructions contained within this or related
message(s).
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
