That seems to be what the red Coupe i bought recently has fitted, Jim. Maybe one of Quantum's options at the time, or maybe just a common accessory?
Dave. On Apr 10, 1:57 pm, Jim Hearne <[email protected]> wrote: > Thats an interesting arrangement, you've got manual Mk3 Fiesta lifter > mechanisms and then an aftermarket electric window kit fitted to that. > Would be much easier to replace it all with Ford electric window mechs. > > I'm guessing that's what you are going to do. > > Jim > > On 10/04/2012 13:26, Mark wrote: > > > > > > > > > Eddie, > > I have hopefully attached a couple of pictures of what I have. Hope it > > makes sense. The only bit not on there is the motor, which is still in > > the door. I won't bin them if you feel they may be of some use to you. > > Mark > > > On Sunday, April 8, 2012 12:08:13 AM UTC+1, Eddie wrote: > > > Hi Mark > > > The motor drive you talk about, are they black boxes that mount on > > the > > door card to conceal the motor? > > Hopefully they should also have a switch mounted on the top to > > operate > > the windows. > > > If I have described what you have, could you confirm please. If you > > are considering chafing them for proper electric windows, I could re > > home what you have as I need them to restore my Mk1 Quantum Hatchback > > > Thanks > > Eddie > > > On Apr 7, 1:50 pm, Mark <[email protected]> wrote: > > > Sorry, it a saloon. > > > It has a remote motor to drive the manual mechanisam. Will try & > > get a > > > picture up. > > > The cables are fine, the cut is where the cable has rubbed > > through at the > > > bend. I got some spacers made up to try & salvage what I've got, > > but no > > > luck. > > > > Mark > > > > On Saturday, April 7, 2012 12:34:20 PM UTC+1, Jim Hearne wrote: > > > > Is this on an H4 ? > > > > The 2+2 and saloon usually just use Mk2 Fiesta manual window > > winders. > > > > Bending the bottom of the runners was the early modification, > > the later > > > > later mod was shortening the runner and adding the spacers. > > > > Of course if it's easy to get new cables made nowadays you > > could just get > > > > a new cable, shorten the runner and not need the spacers. > > > > > Jim > > > > > On 07/04/2012 12:05, Mark wrote: > > > > > Thanks Jim. > > > > > I'm replacing manual winders which have the bend on the bottom > > of the > > > > runner & thus has 'cut' through & is starting to snag. > > > > I take it as long as I avoid black runners then I'll be ok? > > > > > Mark > > > > > On Friday, April 6, 2012 7:05:48 PM UTC+1, Jim Hearne wrote: > > > > >> Yes, they will work as well. > > > >> Make sure they are the same type as you have, the later ones > > have black > > > >> runners and are a different design. > > > > >> Jim > > > > >> On 06/04/2012 14:34, Mark wrote: > > > >> > I've been searching for some 3 door mk3 fiesta electric window > > > >> > mechanisams. Have seen them on ebay, but keep missing them. > > > >> > Is it possible to use 5 door units with the spacer mod? Not > > too > > > >> > concerned if I have to put new holes in for locating. > > > >> > Thanks > > > >> > Mark > > > >> > -- > > > >> > You received this message because you are subscribed to the > > Google > > > >> > Groups "Quantum Owners Group" group. > > > >> > To post to this group, send email to > > [email protected] > > <mailto:[email protected]> > > > >> > To unsubscribe from this group, send email to > > > >> > [email protected] > > <mailto:[email protected]> > > > >> > For more options, visit this group at > > > >> >http://groups.google.com/group/quantumowners?hl=en > > <http://groups.google.com/group/quantumowners?hl=en> > > > > >> > IMPORTANT NOTE: All information presented herewith is > > provided on an > > > >> > "As Is" basis, without warranty or the implication thereof. > > Neither > > > >> > the Quantum Owners Club nor the individuals associated with > > the > > > >> > Quantum Owners Club or in the preparation of the above > > information > > > >> > shall have any liability to any person or entity with > > respect to > > > >> > liability, loss, or damage caused or alleged to be caused > > directly or > > > >> > indirectly by the instructions contained within this or > > related > > > >> > message(s). > > > > > -- > > > > You received this message because you are subscribed to the > > Google Groups > > > > "Quantum Owners Group" group. > > > > To post to this group, send email to > > [email protected] > > <mailto:[email protected]> > > > > To unsubscribe from this group, send email to > > > > [email protected] > > <mailto:[email protected]> > > > > For more options, visit this group at > > > >http://groups.google.com/group/quantumowners?hl=en > > <http://groups.google.com/group/quantumowners?hl=en> > > > > > IMPORTANT NOTE: All information presented herewith is provided > > on an "As > > > > Is" basis, without warranty or the implication thereof. > > Neither the Quantum > > > > Owners Club nor the individuals associated with the Quantum > > Owners Club or > > > > in the preparation of the above information shall have any > > liability to any > > > > person or entity with respect to liability, loss, or damage > > caused or > > > > alleged to be caused directly or indirectly by the > > instructions contained > > > > within this or related message(s). > > > -- > > You received this message because you are subscribed to the Google > > Groups "Quantum Owners Group" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > >http://groups.google.com/group/quantumowners?hl=en > > > IMPORTANT NOTE: All information presented herewith is provided on an > > "As Is" basis, without warranty or the implication thereof. Neither > > the Quantum Owners Club nor the individuals associated with the > > Quantum Owners Club or in the preparation of the above information > > shall have any liability to any person or entity with respect to > > liability, loss, or damage caused or alleged to be caused directly or > > indirectly by the instructions contained within this or related > > message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
