Hi learnerd quantum owners, last year while travelling to the stoneliegh show the handling on our H4 became shall I say interesting, lifting the throttle would have the car pulling to the right, anyhow we got there and home again in one piece and I found that the near side bottom suspension arm rubbers were cracking up allowing the steering to wonder. The arm was changed and the tracking set, fast forward 12 months, recently the front end of the car has become vague it shimmies like a hula girls hips when I accelerate and one checking the tracking it was way out, I looked at both bottom arms again , these were fine both looking like new and nothing else suspicious was seen. The tracking has been reset and both track rods are showing almost the same amount of threads, both very close to 29mm. Does anyone know how long the threaded end is, I could always unscrew one of mine but now the trackings set I don't want to disturb it unless I have to, so if anyone has one on the bench I would be grateful for the information, I don't really want to drive it when there may only be a few mm holding it together. Many thanks guys.
-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
