I don't have the original one for the car and have been using an aftermarket temp gauge. this has failed so I am going to reuse the dash one. I do not know the donor for the ecu, it came from ebay some time ago. Do you have any idea what pin this output will be on, I will meter it to see.
thank you. m Mark Miles Manager Roebuck 8 Market Place Wokingham Berkshire RG40 1AL 07935 068776 ________________________________ From: Jim Hearne <[email protected]> To: [email protected] Sent: Tuesday, 14 August 2012, 14:35 Subject: Re: [Quantum Owners] Temperature sender The answer is, the same colour as the original one for the dash. Otherwise, it’s a question of try it and see. The gauges were matched to the sender (or the other way round) when the cars were built, there are 4 or 5 different colour pairs. If the Ecu came from a Mondeo then yes, if it came from a Escort or Fiesta then no. The Mondeo one will need buffering with a relay. Jim From: taximark Sent: Tuesday, August 14, 2012 1:37 PM To: [email protected] Subject: [Quantum Owners] Temperature sender I have to fit a temp sender to the q. I have been supplied with two different parts by the motor factor. One has a purple insert with resistances from 124 - 843, the other a black insert and 100 - 871. Which is the correct part for the mkII fiesta dash (1.4)? Also, is there an output from the ecu to drive the cooling fan(s)? Mark (Q2-419)-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
