Dear All, To those interested. The following Aftermarket part:
https://www.ebay.co.uk/itm/FORD-FIESTA-Mk2-1-0-Electric-Window-Regulator-Right-1989-TLB-Mechanism-Lifter/232462190335?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 <https://www.ebay.co.uk/itm/FORD-FIESTA-Mk2-1-0-Electric-Window-Regulator-Right-1989-TLB-Mechanism-Lifter/232462190335?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649> This is modifiable. The two ends are plastic and clipped onto the metal rail. It comes with a plug and wire tails so you can renew the plug. (and fit the socket of the new motor, of course) It seems to need 20 mm shortening to fit the Coupe door, so a 20mm spacer fitting. As an aside, my Coupe ford regulator seems to have been cut down by 20mm by being cut in the middle of the rail and welded back together and ground to shape. This brings the mounting brackets closer together. Was this the usual way when built? I built my 2 + 2 new and it needs more shortening but basically you cut one end shorter. Mounting brackets stay in the same position. ATB Derek -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
