I really should know the answer to this, however, when I assembled my Q Saloon the engine and gearbox were inserted from below as a joined unit, and just about cleared the anti-roll bar on both sides! Anyway, to my question....... Is it possible to replace the clutch on a saloon with the engine in position, just by moving the gearbox aside? Martin
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/8544BD5F25F34A4D9DF08ACAD60A12BA%40computer. For more options, visit https://groups.google.com/d/optout.
