Without wanting to stray the thread too much , I will be posting my report on my latest servo master cyl conversion soon after I complete testing.i have used a mgf setup(y2000). I have also installed all the abs gubbins too ! If it doesn't behave then it will just get unplugged and the hardware will behave like a normal servod system.
Back to the brackets, on my first 2+2 the brackets supplied were clearly made in house, the ones on my wife's car are OEM. On Mon, 2 Nov 2020, 15:36 Jim Hearne, <[email protected]> wrote: > *From:* susanandmartin > *Sent:* Monday, November 2, 2020 3:07 PM > *To:* [email protected] > *Subject:* RE: [Quantum Owners] Saloon rear ARB mounting hardware > > > It may be that later ones have the same part (but with a different part > number), but IIRC they changed to a twist beam with no separate ARB. > Anything over a few years old will possibly be difficult to obtain. > > BTW how did the Land Rover servo fit on the Q03? > > Martin > > > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quantumowners/35398E77B2464951B153E19BF06887F7%40JimQuad > <https://groups.google.com/d/msgid/quantumowners/35398E77B2464951B153E19BF06887F7%40JimQuad?utm_medium=email&utm_source=footer> > . > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/CABxHo%2BxOn%3D6y06z8HxhX%3D8mbHFzKsLL9%3DCHfRDXmMx%2B91vCi6A%40mail.gmail.com.
