£12 is certainly cheap for a BMW part! Will be interesting to see how this looks when you get it all installed and of course how it performs. Pretty sure I will need to follow a similar route My rear (suspension that is) ) needs a good working over - needs shorter springs (the ride height is way too high - the rear has the 4*4 look which seems common on Quantum saloons) - needs an adjustable panhard rod (axle is quite offset) - needs new trailing arms and poly bushing all round.... On Monday, 2 November 2020 at 20:31:52 UTC [email protected] wrote:
> So here is a picture showing a comparison of the xr2 Vs the 12mm E60 bar. > > I found it by lots and lots of picture comparing on the net, then took a > gamble on the 12mm which was just £12 delivered! > > I have designed some extension arms to go onto the original ends , this > will offer adjustability and reduce its torsion rating. > > On Mon, 2 Nov 2020, 19:05 [email protected], < > [email protected]> wrote: > >> Darren you seem to have a talent for finding and adapting parts ;-)... >> >> Can I ask how did you arrive at the BMW bar solution - trawling through >> scrapyards or did you find some reference material regarding bar dimensions >> on different cars? >> >> I started searching by just by looking at photos of various bars which >> have similar shape/proportions. Mazda MX5 front was one candidate although >> I haven't measured one up yet. >> >> John >> >> On Monday, 2 November 2020 at 16:27:01 UTC >> [email protected] wrote: >> >>> That servo installation looks good – did it need a new mounting bracket >>> and a change to the transfer tube? >>> >>> Martin >>> >>> >>> >>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for >>> Windows 10 >>> >>> >>> >>> *From: *Jim Hearne >>> *Sent: *02 November 2020 15:35 >>> *To: *[email protected] >>> *Subject: *Fw: [Quantum Owners] Saloon rear ARB mounting hardware >>> >>> >>> >>> *From:* susanandmartin >>> >>> *Sent:* Monday, November 2, 2020 3:07 PM >>> >>> *To:* [email protected] >>> >>> *Subject:* RE: [Quantum Owners] Saloon rear ARB mounting hardware >>> >>> >>> >>> It may be that later ones have the same part (but with a different part >>> number), but IIRC they changed to a twist beam with no separate ARB. >>> Anything over a few years old will possibly be difficult to obtain. >>> >>> BTW how did the Land Rover servo fit on the Q03? >>> >>> Martin >>> >>> >>> >>> -- >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Quantum Owners Group" group. >>> To post to this group, send email to [email protected] >>> To unsubscribe from this group, send email to >>> [email protected] >>> For more options, visit this group at >>> http://groups.google.com/group/quantumowners?hl=en >>> >>> IMPORTANT NOTE: All information presented herewith is provided on an "As >>> Is" basis, without warranty or the implication thereof. Neither the Quantum >>> Owners Club nor the individuals associated with the Quantum Owners Club or >>> in the preparation of the above information shall have any liability to any >>> person or entity with respect to liability, loss, or damage caused or >>> alleged to be caused directly or indirectly by the instructions contained >>> within this or related message(s). >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Quantum Owners Group" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/quantumowners/35398E77B2464951B153E19BF06887F7%40JimQuad >>> >>> <https://groups.google.com/d/msgid/quantumowners/35398E77B2464951B153E19BF06887F7%40JimQuad?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> >> -- >> -- >> You received this message because you are subscribed to the Google Groups >> "Quantum Owners Group" group. >> To post to this group, send email to [email protected] >> To unsubscribe from this group, send email to >> [email protected] >> For more options, visit this group at >> http://groups.google.com/group/quantumowners?hl=en >> >> IMPORTANT NOTE: All information presented herewith is provided on an "As >> Is" basis, without warranty or the implication thereof. Neither the Quantum >> Owners Club nor the individuals associated with the Quantum Owners Club or >> in the preparation of the above information shall have any liability to any >> person or entity with respect to liability, loss, or damage caused or >> alleged to be caused directly or indirectly by the instructions contained >> within this or related message(s). >> --- >> You received this message because you are subscribed to the Google Groups >> "Quantum Owners Group" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/quantumowners/58e1e570-abe6-4852-9bd3-7ebad0e5b0b0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/quantumowners/58e1e570-abe6-4852-9bd3-7ebad0e5b0b0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/5c75ec4b-4cab-49d6-a468-54077aca0e3cn%40googlegroups.com.
