Tried to reply to this subject yesterday, hopefully post will work today. Just to echo Jim’s comment Waxoyl should be kept as far away from fiberglass as possible. My saloon has a small pipe stub mounted on the bulkhead. There is evidence of there being a pipe on it at some point though nothing is mounted to it now. I presume its a air inlet for the heater in a similar way to the 2+2 that has the much larger air inlet pipe over one of the wheelarches. I will get a photo of the pipe stub Sent from Mail for Windows 10 From: mgaskin via Quantum Owners Group Hi Bill, Many thanks for this reassurance. My Q is absolutely fine further back – the patch is small, only at the front, and only visible on the outside. Next time I need to go somewhere I’ll take a picture, as the car’s parked tight up against the house right now. Thanks again. Matthew From: 'Bill Allison' via Quantum Owners Group <[email protected]> Matthew Brown stain only at the front doesn't sound too threatening, much more important from a safety point of view is the area just forward of the 'B' pillar, where the seat belt attaches. Perhaps it will be sufficient in your case, to prevent further deterioration, to block the drain hole below the bottom of the 'A' pillar and temporarily fill the bottom with, say, thinned waxoyl. Capillary action should get it to the stained area. Also, coat inside the steel the full length of the sill with waxoyl (thinned by warming) using the pump and long tubes available for this sort of task. You'll need to drill a hole, say 20mm, into the sill as the two holes for the seat belt mount are too small. John & Matthew Brown staining on the fibreglass on the inside below the doors is one sign but a look inside is also necessary because if the member is rotting from the inside you won't see any staining until it has perforated. A borescope will reveal all https://www.amazon.co.uk/Inspection-Depstech-Waterproof-Borescope-Smartphone-Black/dp/B01NBFTAHE/ref=sr_1_5?dchild=1&keywords=Borescope+Inspection+Camera&qid=1616832893&sr=8-5 Best regards
On Friday, 26 March 2021, 15:34:26 GMT, mgaskin via Quantum Owners Group <[email protected]> wrote: >Finally, check that no water has entered the sills. Poor fibreglass lay-up by QSC at the front of the sill in front of the 'A' pillar led to me having to >replace the metal sill - it had rotted away to nothing near the seat belt attachment! This sounds like a possible (and alarming) explanation for the brown patch under the gelcoat on my 2+2 below the door hinges in the sill. I've asked for a logon for the proboards to look at your link. Matthew -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+[email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/00c101d72255%247f6fd900%247e4f8b00%24%40yahoo.com. -- -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/58B0D132-339B-4836-83BB-4451D5890508%40hxcore.ol. |
- Re: [Quantum Owners] Saloon Ventil... [email protected]
- Re: [Quantum Owners] Saloon Ventil... Jim Hearne
- Re: [Quantum Owners] Saloon Ventil... Derek Clews
- Re: [Quantum Owners] Saloon Ventil... 'Bill Allison' via Quantum Owners Group
- RE: [Quantum Owners] Saloon Ventil... mgaskin via Quantum Owners Group
- Re: [Quantum Owners] Saloon Ventil... Jim Hearne
- Re: [Quantum Owners] Saloon Ventil... [email protected]
- Re: [Quantum Owners] Saloon Ventil... 'Bill Allison' via Quantum Owners Group
- Re: [Quantum Owners] Saloon Ventil... Jim Hearne
- RE: [Quantum Owners] Saloon Ventil... mgaskin via Quantum Owners Group
- RE: [Quantum Owners] Saloon Ventil... paul slater
- Re: [Quantum Owners] Saloon Ventil... Darren Siepka
